Toyota Hilux Surf 1993 Owner's Manual page 749

STEERING – Steering Column (Tilt Steering Column)
2. INSTALL MAIN SHAFT
(a) Install the main shaft with the bearing, collar and
spring.
(b) Using SST to hold the main shaft, install the snap
ring with snap ring pliers.
SST 09950–20017
3. INSTALL TURN SIGNAL BRACKET
Install the two bolts.
Torque: 7.8 N–m (80 kgf–cm, 69in.–lbf)
4. SELECT STEERING BOLT AND UPPER COLUMN TUBE
Select the bolt with center hole when the upper column
tube mark is 1, and select the bolt without hole when the
mark is 2.
5. INSTALL MAIN SHAFT WITH UPPER COLUMN TUBE
(a) Install the stopper and main shaft collar to the main
shaft as shown.
(b) Install the main shaft to the lower column tube.
SR–15