Toyota Hilux Surf 1993 Owner's Manual page 193

MT2–56
MANUAL TRANSMISSION –
(e) Install the shift lever housing to the shift and select
lever shaft, push in the transfer adaptor.
(f) Install and torque the bolt.
Torque: 39 N–m (400 kgf–cm, 29 ft–lbf)
(g) Install the nine bolts to the transfer adaptor.
(h) Torque the bolts.
Torque: 37 N–m (380 kgf–cm, 27ft¿lbf)
28. AFTER INSTALLING EXTENSION HOUSING,
CHECK FOLLOWING ITEMS:
(a) Check to see that the input shaft and output shaft
rotate smoothly.
(b) Check to see that shifting can be made smoothly to all
positions.
29. INSTALL RESTRICT PINS
(a) Install the restrict pins together with a gasket.
HINT: Install the black pin on the reverse gear/5th
gear side.
(b) Torque the restrict pins.
Torque: 40 N–m (410 kgf–cm, 30 ft–lbf)
30. (2WD)
INSTALL SHIFT LEVER RETAINER
(a) Install the shift lever retainer with a oil baffle.
(b) Install and torque the six bolts.
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)
COMPONENT PARTS INSTALLATION