Toyota Hilux Surf 1993 Owner's Manual page 832

SR–100
STEERING – Steering Linkage (4WD)
2. REMOVE IDLER ARM WITH SHAFT
Remove the nut and pull the idler arm with the shaft off
the idler arm bracket.
3. REMOVE OIL SEAL
Using a screwdriver, remove the oil seal.
ASSEMBLY OF IDLER ARM BRACKET
1. INSTALL OIL SEAL
Using SST, tap in a new oil seal.
SST 09620–30010 (09624–30010, 09631–00020)
2. APPLY MP GREASE
3. INSTALL IDLER ARM WITH SHAFT
(a) Install the idler arm shaft to the bracket.
(b) Install the washer and nut.
Torque: 78 N–m (800 kgf–cm, 58 ft–lbf)
4. INSPECT IDLER ARM FOR ROTATION CONDITION
Using a torque meter, turn the nut several times and take
the torque reading.
Torque (Turning): 0.5 – 2.9 N¿ m
If necessary, replace the bushings.
(5 – 30 kgf–cm, 5 – 26 in.¿lbf)