Clearing Of Diagnostic Trouble Codes - Toyota Hilux Surf 1993 Owner's Manual

BR–76
BRAKE SYSTEM – Rear–Wheel Anti–Lock Brake System
CLEARING OF DIAGNOSTIC TROUBLE
CODES
CLEAR DIAGNOSTIC TROUBLE CODES
(a) Turn the ignition switch to ON.
(b) Disconnect the service connector.
HINT: Keep the vehicle stopped (vehicle speed 0 km/h
(0 mph)).
(c) Using SST, connect the terminal Tc to E, of the data
link connector 1.
SST 09843–18020
(d) Clear the diagnostic trouble codes stored in ECU by
depressing the brake pedal 8 or more times within 3
seconds.
(e) Check that the warning light shows the –normal
code.
If the warning light still shows the diagnostic trouble
codes, check for cause and repair or replace the
trouble
parts, then clear the diagnostic trouble codes again.
(f) Connect the service connector.
(g) Disconnect the terminal Tc from E, of the data link
connector 1.