Steering Column Disassembly - Toyota Hilux Surf 1993 Owner's Manual

SR–6
STEERING – Steering Column (Non–Tilt Steering Column)
DISASSEMBLY OF STEERING COLUMN
1. REMOVE COLUMN HOLE COVER
(a) Disconnect the intermediate shaft from the main
shaft.
(b) Remove two bolts and the dust seal.
(c) Remove the column hole cover.
2. PULL OUT MAIN SHAFT
(a) Using snap ring pliers, remove the snap ring.
(b) Pull out the main shaft from the upper tube.
HINT: Do not place the ignition key at the LOCK posi–
tion.
(c) Using snap ring pliers, remove the snap ring.
3. REMOVE UPPER BRACKET
(a) Using a centering punch, mark the center of the
tapered–head bolts.
(b) Using a 3 – 4 mm (0.12 – 0.16 in.) drill, drill into
the tapered–head bolts.
(c) Using a screw extractor, remove the tapered–head
bolts.
(d) Remove the two bolts and separate the upper
bracket and column tube.