Manual Gear Housing (4Wd) Disassembly - Toyota Hilux Surf 1993 Owner's Manual

SR–28
STEERING – Manual Gear Housing (4WD)
DISASSEMBLY OF MANUAL GEAR HOUSING
1. REMOVE BLEEDER PLUG AND DRAIN GEAR OIL
2. REMOVE END COVER
(a) Remove the adjusting screw lock nut and four bolts.
(b) Remove the end cover by turning the adjusting
screw clockwise.
3. REMOVE SECTOR SHAFT
(a) Using a plastic hammer, tap out the sector shaft.
(b) Remove the sector shaft.
4. REMOVE WORM BEARING ADJUSTING SCREW LOCK
NUT
Using SST, remove the lock nut.
SST 09617–60010
5. REMOVE WORM BEARING ADJUSTING SCREW
Using SST, remove the adjusting screw.
SST 09616–22010