Toyota Hilux Surf 1993 Owner's Manual page 694

BRAKE SYSTEM – Rear Brake – 4WD
(b) Apply high temperature grease to the adjuster bolt
threads and ends.
6. INSTALL PARKING BRAKE LEVER AND AUTOMATIC
ADJUSTING LEVER
(a) Install the parking brake lever with a new C–
washer.
(b) Install the automatic adjusting lever with the E–
ring.
7. INSTALL ADJUSTER TO FRONT SHOE
(a) Install the adjuster to the adjust lever.
(b) Install the adjust lever spring.
8. INSTALL FRONT SHOE
(a) Install the parking brake cable No. 1 to the parking
brake shoe lever.
(b) Hook the another side of the cable No. 1 to the
bellcrank No.3.
(c) Install the return spring to the front shoe.
(d) Set the front shoe in place with the end of the
shoe inserted in the piston.
(e) Using SST, install the shoe hold–down spring,
cups and pin.
SST 09718–00010
NOTICE: Do not allow oil or grease to get on the rub–
bing face.
BR–61