Wheel Alignment 2Wd - Toyota Hilux Surf 1993 Owner's Manual

SUSPENSION AND AXLE –
WHEEL ALIGNMENT
2WD
1. MAKE FOLLOWING CHECKS AND CORRECT ANY
PROBLEMS
(a) Check the tires for wear and proper inflation.
Cold tire inflation pressure: See page A–23
(b) Check the wheel runout.
Lateral runout: 1.2 mm (0.047 in.) or less
(c) Check the front wheel bearings for looseness.
(d) Check the front suspension for looseness.
(e) Check the steering linkage for looseness.
(f) Use the standard bounce test to check that the front
absorbers work properly.
2. MEASURE CHASSIS GROUND CLEARANCE
Chassis ground clearance: See page A–23
If the clearance of the vehicle is not standard, try to ad–
just it by pushing down on the body or by lifting the
body. If still not correct, check for bad springs or suspen–
sion parts.
HINT: Before inspecting wheel alignment, adjust chas–
sis ground clearance to specification.
Wheel Alignment (2WD)
SA–3