SA–142
SUSPENSION AND AXLE
–
(4 Pinion Type)
1. DISASSEMBLE DIFFERENTIAL CASE
(a) Place the matchmarks on the LH and RH cases.
(b) Remove the eight bolts.
(c) Using a plastic hammer, separate the LH and RH
cases.
2. REMOVE FOLLOWING PARTS FROM CASE:
Two side gears
•
Two side gears thrust washers
•
Spider
•
Four pinion gears
•
Four pinion gear thrust washers
•
3. MEASURE SIDE GEAR BACKLASH
(a) Install the thrust washer to the side gear.
(b) Install the side gear to the RH case.
(c) Install the four pinion gears and thrust washers tc
the spider.
(d) Install the pinion gear and spider to the RH case.
Differential