Toyota Hilux Surf 1993 Owner's Manual page 581

SUSPENSION AND AXLE –
17. INSTALL DIFFERENTIAL TUBE
Install the differential tube to the differential carrier with
the four bolts.
Torque: 88 N–m (900 kgf–cm, 65 ft–lbf)
18. INSTALL SIDE GEAR SHAFTS
(a) Before installing the shafts, replace the snap ring.
(b) Using SST, install the side gear shafts to the differ–
ential carrier.
SST 09910–00015
(09911–00011, 09912–00010, 09914–00011)
19. INSTALL DIFFERENTIAL CARRIER COVER
(a) Remove any packing material and be careful not to
drop oil on the contacting surface of the differential
carrier or carrier cover.
(b) Apply seal packing to the carrier cover.
Seal packing: Part No. 08826–00090, THREE BOND
HINT: Install the carrier cover within ten minutes after
applying seal packing.
(c) Install and torque the bolts.
Torque: 47 N–m (475 kgf–cm, 34 ft–Ibf)
Front Differential (Disassembly and Assembly of
Differential w/o A D D )
1281 or equivalent
SA–81