Toyota Hilux Surf 1993 Owner's Manual page 78

MANUAL TRANSMISSION –
(b) Apply gear oil to the needle roller bearing.
(c) Assemble the 1st gear, synchronizer ring, needle
roller bearing and bearing inner race.
(d) Install the assembly on the output shaft with the
synchronizer ring slots aligned with shifting keys.
(e) Turn the inner race to align it with the locking ball.
8. INSTALL OUTPUT SHAFT REAR BEARING
Using SST and a press, install the bearing on the output
shaft with outer race snap ring groove toward the rear.
HINT: Hold the 1st gear inner race to prevent it from
falling.
SST 09 506–3 5010
9. INSTALL FIFTH GEAR
Using SST and a press, install the 5th gear.
SST 09506–35010
10. INSTALL SNAP RING
(a) Select a snap ring that will allow minimum axial
play.
Mark
(b) Using a screwdriver and hammer, tap in the snap
Component Parts (Output Shaft Assembly
Thickness mm (in.)
ring.
MT1–47