TF–58
TRANSFER
–
Component Parts (Planetary Gear)
Planetary Gear
COMPONENTS
INSPECTION OF PLANETARY GEAR
1. MEASURE PLANETARY PINION GEAR THRUST
CLEARANCE
Using a feeler gauge, measure the planetary pinion gear
thrust clearance.
Standard clearance: 0.11 – 0.86 mm
Maximum clearance: 0.86 mm (0.0339 in.)
If the clearance exceeds the limit, replace the planetary
gear assembly.
2. CHECK OIL CLEARANCE OF PLANETARY PINION
GEAR
Using a dial indicator, measure the oil clearance of the
planetary pinion gear.
Standard clearance: 0.009 – 0.038 mm
Maximum clearance: 0.038 mm (0.0015 in.)
If the clearance exceeds the limit, replace the plane-
tary gear assembly.
(0.0043 – 0.0339 in.)
(0.0004 – 0.0015 in.)