Transfer Assembly (Vf1A) - Toyota Hilux Surf 1993 Owner's Manual

TF–64
TRANSFER – Assembly of Transfer
ASSEMBLY OF TRANSFER
(See pages TF–32, 33)
1. INSTALL PLANETARY RING GEAR
(a) Install the planetary ring gear to the front case.
HINT: Make sure to install the ring gear in the correct di–
rection.
(b) Install the pin and spring.
(c) Apply liquid sealer to the plug.
Sealant: Part No. 08833–00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(d) Install and torque the plug.
Torque: 19 N m (190 kgf –cm, 14 ft–Ibf )
(e) Install the snap ring.
HINT: Be sure the end gap of the snap ring is not
aligned with the upper side of the case.
2. INSTALL INPUT SHAFT TO PLANETARY GEAR ASSEM–
BLY
(a) Apply gear oil to the thrust bearing and race.
(b) Install the race and thrust bearing.
(c) Install the input shaft into the planetary gear assem–
bly.