Toyota Hilux Surf 1993 Owner's Manual page 482

TF–70
TRANSFER – Assembly of Transfer
(b) Shift the high and low hub sleeve to low side (rear
side).
(c) Assemble the front case and rear case.
(d) Install and torque the twelve bolts.
Torque: 37 N–m (380 kgf–cm, 27 ft–lbf)
16. INSTALL SPEEDOMETER DRIVE GEAR
(a) Install the ball on the rear output shaft.
(b) Install the speedometer drive gear.
HINT: Make sure to install the speedometer drive gear
in the correct direction.
17. INSTALL EXTENSION HOUSING
(a) Apply seal packing to the extension housing as
shown in the figure.
Seal packing: Part No. 08826–00090, THREE BOND
1281 or equivalent
(b) Install the extension housing to the rear case.
(c) Apply liquid sealer to the bolts.
Sealant: Part No. 08833–00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(d) Install and torque the five bolts.
Torque: 11 N–m (115 kgf–cm, 8 ft–Ibf )
18. INSTALL FRONT COMPANION FLANGE
HINT: Front companion flange bolts are silver.
(a) Apply gear oil to the companion flange inner sur–
face.
(b) Install the front companion flange to the driven
sprocket shaft.
(c) Using SST to hold the flange, install the companion
flange lock nut.
SST 09330–00021
Torque: 118 N–m (1,200 kgf–cm, 87 ft–lbf)
(d) Stake the lock nut.