Toyota Hilux Surf 1993 Owner's Manual page 111

MANUAL TRANSMISSION –
2. REMOVE HUB SLEEVE NO.1 ASSEMBLY AND SECOND
GEAR ASSEMBLY
(a) Using two screwdrivers and a hammer, tap out the
snap ring.
(b) Using a press, remove the hub sleeve No. 1, syn–
chronizer ring and 2nd gear.
(c) Remove the needle roller bearing.
3. REMOVE HUB SLEEVE NO.2 ASSEMBLY AND THIRD
GEAR ASSEMBLY
(a) Using a snap ring expander, remove the snap ring.
(b) Using a press, remove the hub sleeve No.2, syn–
chronizer ring and 3rd gear.
(c) Remove the needle roller bearing.
4. REMOVE THE SHIFTING KEYS AND SPRINGS FROM
HUB SLEEVE ASSEMBLY
Using screwdriver, remove the three shifting keys and
two springs.
HINT: Hub sleeve No. 1 and hub sleeve No.2.
Component Parts (Output Shaft Assembly)
MT1–81