SUSPENSION AND AXLE
–
2. INSTALL STABILIZER BAR
(a) Place the stabilizer bar to the rear axle housing.
(b) Install the cushion and bracket.
Torque: 13 N–m (130 kgf–cm, 9 ft–lbf)
3. CONNECT STABILIZER BAR LINK
(a) Position the link to the body.
(b) Install the retainers and cushion to the link.
(e) Install a new nut.
Torque: 17 N–m (170 kgf–cm, 12 ft–lbf)
4. LOWER VEHICLE
Rear Suspension (Stabilizer Bar)
SA–163