Toyota Hilux Surf 1993 Owner's Manual page 474

TF–62
TRANSFER – Component Parts (Oil Seals)
2. IF NECESSARY, REPLACE FRONT CASE OIL SEAL
(a) Using a screwdriver and hammer, drive out the oil
seal.
(b) Using SST and a hammer, drive in a new oil seal un–
til its surface is flush with the case upper surface.
SST 09316–60010 (09316–00010)
(c) Coat the lip of the oil seal with MP grease.
3. IF NECESSARY, REPLACE EXTENSION HOUSING OIL
SEAL
(a) Using a screwdriver and hammer, drive out the oil
seal.
(b) Using SST and a hammer, drive in a new oil seal un–
til its surface is flush with the housing upper sur–
face.
SST 09550–22011 (09550–00020, 09550–00031)
(c) Coat the lip of the oil seal with MP grease.
4. IF NECESSARY, REPLACE FRONT AND REAR
COMPANION FLANGES OIL SEAL
(a) Using a screwdriver and hammer, drive out the oil
seal.