Toyota Hilux Surf 1993 Owner's Manual page 184

MANUAL TRANSMISSION –
10. INSTALL SNAP RING
(a) Select a snap ring that will allow minimum axial play.
Mark
(b) Using a screwdriver and hammer, tap in the snap ring.
11. INSTALL NO.3 HUB SLEEVE ASSEMBLY
(a) Check for reverse synchronizer pull ring position.
(b) Install the No.3 hub sleeve assembly to the No.3
clutch hub.
12. INSTALL SPACER, NEEDLE ROLLER BEARING AND
COUNTER FIFTH GEAR
(a) Install the spacer.
(b) Apply gear oil to the needle roller bearing.
(c) Install the needle roller bearing to the counter fifth
gear.
(d) Install the counter 5th gear with 5th gear gaps aligned
with synchronizer corn ring pin.
COMPONENT PARTS INSTALLATION
Thickness mm (in.)
MT2–47