Toyota Hilux Surf 1993 Owner's Manual page 192

MANUAL TRANSMISSION –
(e) Install the shift lever housing to the shift and select
lever shaft, push in the extension housing.
(f) Install and torque the bolt.
Torque: 39 N–m (400 kgf–cm, 29 ft–lbf)
(g) Install the nine bolts to the extension housing.
(h) Torque the bolts.
Torque: 37 N–m (375 kgf–cm, 27 ft–lbf)
27. (4WD)
INSTALL TRANSFER ADAPTOR
(a) Install the shift and select lever into the transfer
adaptor.
(b) Remove the any packing material and be careful not
to drop oil on the contacting surface of the transfer
adaptor or intermediate plate.
(c) Apply seal packing to the extension housing.
Seal packing:
Part No. 08826 – 00090, THREE BOND 1281 or
equivalent
(d) Connect the shift and select lever to the shift fork
shaft.
COMPONENT PARTS INSTALLATION
MT2–55