Toyota Hilux Surf 1993 Owner's Manual page 513

SA–4
SUSPENSION AND AXLE –
3. INSTALL WHEEL ALIGNMENT EQUIPMENT
Follow the specific instructions of the equipment manu–
facturer.
4. ADJUST WHEEL ANGLE
Remove the caps of the knuckle stopper bolts and check
the steering angles.
Steering angles: See page A–24
HINT: When the steering wheel is fully turned, make
sure that the wheel is not touching the body or brake
flexible hose.
If maximum steering angles differ from standard val-
ue, adjust the wheel angle with the knuckle stopper
bolts.
Torque: 34 N–m (350 kgf–cm, 25 ft–lbf)
If the wheel angle still cannot be adjusted within limits,
inspect and replace damaged or worn steering parts.
5. ADJUST CAMBER, STEERING AXIS INCLINATION AND
CASTER
Specifications: See page A–23, 24
Wheel Alignment (2WD)