Toyota Hilux Surf 1993 Owner's Manual page 440

TF–28
TRANSFER – Assembly of Transfer
(b) Align the slotted spring hole in the fork with the hole
in the shaft.
(c) Using a pin punch and hammer, drive in the slotted
spring pin.
10. INSTALL INTERLOCK PIN AND FRONT DRIVE SHIFT
FORK SHAFT
(a) Install the interlock pin.
(b) Install the front drive shift fork shaft with the two
grooves facing outward.
11. INSTALL TWO BALLS, SPRINGS AND
PLUGS
(a) Install the ball and spring.
(b) Apply liquid sealer to the plug threads.
Sealant: Part No. 08833–00080, THREE BOND
1344, LOCTITE 242 or equivalent
(c) Using SST, install and torque the plug.
SST 09313–30021
Torque: 12 N–m (120 kgf–cm, 9 ft–lbf)
(d) Install the ball, spring and plug to the opposite side.
12. INSTALL LOCKING BALL AND NO.2 SPACER