Toyota Hilux Surf 1993 Owner's Manual page 483

TRANSFER – Assembly of Transfer
19. INSTALL REAR COMPANION FLANGE
HINT: Rear companion flange bolts are black.
Install the rear companion flange in the same way as the
front companion flange.
20.–1 (3VZ–E/R 150F)
INSTALL CONTROL RETAINER
(a) Install the select return spring to the control re–
tainer.
(b) Remove the gasket and install a new one to the con–
trol retainer.
(c) Install the control retainer.
(d) Install and torque the four bolts.
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)
20.–2 (22R–E/G58, A340F)
INSTALL UPPER COVER AND OIL DEFLECTOR
(a) Remove the gasket and install a new one to the case
cover.
(b) Install the upper cover and oil deflector.
(c) Install and torque the four bolts.
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)
21. INSTALL FRONT RETAINER
(a) Remove the gasket and install a new one to the
front retainer.
(b) Install the front retainer.
(c) Apply liquid sealer to the bolts.
Sealant: Part No. 08833–00080, THREE BOND 1344,
LOCTITE 242 or equivalent
(d) Install and torque the seven bolts.
Torque: 11 N m (115 kgf –cm, 8 ft–Ibf)
TF–71