Toyota Hilux Surf 1993 Owner's Manual page 554

SA–54
\
SUSPENSION AND AXLE –
(c) Using SST, remove the companion flange.
SST 09557–22022 (09557–22030)
4. REMOVE OIL SEAL AND OIL SLINGER
(a) Using SST, remove the oil seal.
SST 09308–10010
(b) Remove the oil slinger.
5. REMOVE REAR BEARING AND BEARING SPACER
(a) Using SST, remove the rear bearing from the drive
pinion.
SST 09556–30010
(b) Remove the bearing spacer.
6. INSTALL NEW BEARING SPACER AND REAR BEARING
(a) Install a new bearing spacer on the drive pinion.
(b) Install the rear bearing on the drive pinion.
7. INSTALL OIL SLINGER AND NEW OIL SEAL
(a) Install the oil slinger.
(b) Using SST, drive in a new oil seal.
SST 09554–30011
Oil seal drive in depth: 1.5 mm (0.059 in.)
(c) Apply MP grease to the oil seal lip.
Front Differential (On–Vehicle Replacement of Rear Oil
Seal)