Toyota Hilux Surf 1993 Owner's Manual page 536

SA–32
SUSPENSION AND AXLE –
3. INSTALL TENSION SPRING IN CLUTCH
Install the tension spring in the clutch with the spring end
aligned with the initial groove.
4. INSTALL FOLLOWER PAWL TO CLUTCH
(a) Place the follower pawl on the tension spring with
one of the large tabs against the bent spring end.
(b) Place the top ring of the spring on the small tabs.
5. INSTALL CLUTCH AND SPRING INTO COVER
(a) Place the spring between the cover and clutch with
the large spring end toward the cover.
(b) Compress the spring and install the clutch with the
pawl tab fit to the handle cam.
6. TEMPORARILY INSTALL COVER TO BODY AND CHECK
FREE WHEELING HUB
(a) Set the control handle and clutch to the FREE posi–
tion.
Free Wheeling Hub