STEERING
–
Power Steering (Gear Housing)
DISASSEMBLY OF GEAR HOUSING
(See page SR–76)
1. MOUNT HOUSING ON STAND
Mount the gear housing on SST and clamp SST in a vise.
SST 09630–00012 (09631–00140)
2. REMOVE END COVER
(a) Remove the adjusting screw lock nut.
(b) Remove the four bolts and No. 1 hose support
bracket.
(c) Screw in the adjusting screw until the cover comes
off.
3. REMOVE CROSS SHAFT
Using a plastic hammer, tap on the cross shaft end and
pull out the shaft.
SR–79