Free Wheeling Hub Installation - Toyota Hilux Surf 1993 Owner's Manual

SUSPENSION AND AXLE –
(b) Insert the cover in the body and verify that the inner
hub turns smoothly.
(c) Remove the cover from the body.
INSTALLATION OF FREE WHEELING HUB
1. INSTALL FREE WHEELING HUB BODY
(a) Place a new gasket in position on the front axle hub.
(b) Install the free wheeling hub body with six cone
washers and nuts. Tighten the nuts.
Torque: 31 N–m (315 kgf–cm. 23 ft–lbf)
2. INSTALL BOLT WITH WASHER
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)
3. APPLY MP GREASE TO INNER HUB SPLINES
4. INSTALL FREE WHEELING HUB COVER WITH NEW GAS–
KET
(a) Set the control handle and clutch to the FREE posi–
tion.
(b) Place a new gasket in position on the cover.
Free Wheeling Hub
SA–33