Upper Suspension Arm Installation - Toyota Hilux Surf 1993 Owner's Manual

SA–26
SUSPENSION AND AXLE –
INSTALLATION OF UPPER SUSPENSION
ARM
1. INSTALL UPPER ARM
(a) Install the upper arm together with the camber ad–
justing shims.
(b) Torque the bolts.
Torque: 96 N–m (980 kgf–cm, 71 ft–lbf)
HINT: Install an equal number and thickness of shims in
their original position.
2. CONNECT UPPER ARM
Connect the upper arm with the four bolts and nuts.
Torque: 31 N–m (320 kgf–cm, 23 ft–lbf)
3. TORQUE UPPER ARM SHAFT BOLTS
(a) Install the wheel.
(b) Remove the stands and bounce the vehicle up and
down to stabilize the suspension.
(c) Torque the upper arm shaft bolts.
Torque: 126 N–m (1,280 kgf–cm, 93 ft–Ibf)
4. CHECK FRONT WHEEL ALIGNMENT
(See page SA–3)
Front Suspension (Upper Suspension Arm)