SA–14
SUSPENSION AND AXLE
–
(b) Snug down the bearing by turning the hub several
times.
(c) Loosen the nut until it can be turned by hand.
(d) Using a spring tension gauge, measure and make a
note of the frictional force of the oil seal.
(e) Tighten the nut until the preload is within specifica–
tion.
Preload (starting):
(f) Measure the hub axial play.
Axial play: 0.05 mm (0.0020 in.) or less
6. INSTALL LOCK NUT, COTTER PIN AND GREASE CAP
7. INSTALL BRAKE CYLINDER AND TORQUE PLATE ONTO
STEERING KNUCKLE
Torque: 34 N–m (350 kgf–cm, 25 ft–lbf)
Front Axle Hub and Steering Knuckle (Front Axle Hub)
Add oil seal frictional force
Single rear wheel
5.9– 17.7N(0.6– 1.8kgf, 1.3–4.–lbf)
Double rear wheels
3.9–9.8N(0.4– 1.Okgf,0.9–2.21bf)