STEERING
–
Steering Column (Tilt Steering Column)
6. REMOVE TWO TILT PAWLS
(a) Remove the nut and bolt.
(b) Remove the two pawls with the collars.
7. REMOVE TILT LEVER ASSEMBLY, TILT LEVER, TILT
SUB LEVER AND LEVER LOCK BOLT
Remove one screw and tilt lever assembly.
8. REMOVE UPPER COLUMN TUBE
(a) Set SST, the nut (10 mm nominal diameter, 1.25
mm pitch), plate washer (36 mm outer diameter)
and bolt (10 mm nominal diameter, 1. 25 mm pitch,
50 mm length) as shown. And then remove the two
bolts.
SST 09910–00015 (09911–00011, 09912–00010)
(Reference) Nut
Plate washer 90201–10201
Bolt
(b) Remove the upper column tube from the lower col–
umn tube.
(c) Remove the stopper.
9. REMOVE TURN SIGNAL BRACKET
90170–10004
91111–51050
SR–11