Transmission Assembly - Toyota Hilux Surf 1993 Owner's Manual

MT1–56
MANUAL TRANSMISSION –
ASSEMBLY OF TRANSMISSION
(See pages
HINT: Coat all of the sliding and rotating surface with
gear oil before assembly.
1. INSTALL OUTPUT SHAFT TO INTERMEDIATE PLATE
(a) Install the output shaft into the intermediate plate by
pushing on the output shaft and tapping on the in–
termediate plate.
(b) Using a snap ring expander, install the output shaft
center bearing snap ring.
HINT: Be sure the snap ring is flush with the intermedi–
ate plate surface.
2. INSTALL INPUT SHAFT TO OUTPUT SHAFT
(a) Apply MP grease to the 13–needle roller bearing and
install them into the input shaft.
(b) Install the input shaft to the output shaft with the
synchronizer ring slots aligned with the shifting
keys.
3. INSTALL COUNTER GEAR TO INTERMEDIATE PLATE
(a) Using a snap ring expander, install snap ring to
counter gear rear bearing.
Assembly of Transmission
MT1–26 to 28)