Brake Actuator Removal - Toyota Hilux Surf 1993 Owner's Manual

BR–90
BRAKE SYSTEM – Rear–Wheel Anti–Lock Brake System
5. REMOVE ACTUATOR CHECKER (SST)
Remove SST, then connect the connectors of the actua–
tor and solenoid relay.
SST 09990–00150 and 09990–00205
6. REMOVE SST FROM WHEEL CYLINDER
SST 09709–29017
7. REMOVE PRESSURE GAUGE FROM PS PUMP
Remove the pressure gauge from the PS line, then bleed
the power steering system.
8. BLEED SYSTEM
(a) Fill brake reservoir with brake fluid.
(b) Fill PS reservoir with fluid.
Fluid type: ATF DEXRONE ll
(c) Bleed the system.
(See page BR–94)
REMOVAL OF BRAKE ACTUATOR
1. REMOVE BATTERY
Disconnect the wire harnesses from the terminals and re–
move the battery and tray.
2. DISCONNECT CONNECTOR
Disconnect the connector from the actuator.
3. DISCONNECT TWO BRAKE TUBES
Using SST, disconnect the two brake tubes.
SST 09751–36011