STEERING
–
Manual Gear Housing (4WD)
(c) Using SST, remove the outer race from the gear
housing.
SST 09612–65014 (09612–01030)
(d) Using SST, press in a new outer race into the gear
housing.
SST 09550–10012 (09552–10010, 09559–10010)
(e) Using SST, remove the outer race from the adjusting
screw.
SST 09612–65014 (09612–01040)
(f) Using SST, press in a new outer race into the adjust–
ing screw.
SST 09550–10012 (09552–10010, 09559–10010)
3. IF NECESSARY, REPLACE ADJUSTING SCREW OIL
SEAL
(a) Using a socket wrench, drive out the oil seal.
SR–31