Transmission Valve Body Removal (A340H) - Toyota Hilux Surf 1993 Owner's Manual

AUTOMATIC TRANSMISSION
ON–VEHICLE REPAIR
Transmission Valve Body
REMOVAL OF VALVE BODY AND/OR SOLENOID
VALVE
1. CLEAN TRANSMISSION EXTERIOR
To prevent contamination, clean the exterior of the trans–
mission.
2. DRAIN TRANSMISSION FLUID
Remove the drain plug and drain the fluid into a suitable
container.
3. REMOVE FRONT STABILIZER BAR
(See page SA–123)
4. REMOVE FRONT PROPELLER SHAFT
(See page PR–4)
5. REMOVE TRANSMISSION OIL PAN
(a) Remove the nineteen bolts.
(b) Install the blade of SST between the transmission
case and oil pan, cut off applied sealer.
SST 09032–00100
NOTICE: Be careful not to damage the oil pan
flange.
(c) Remove pan by lifting the transmission case.
6. REMOVE OIL STRAINER AND GASKETS
(a) Remove the eleven bolts holding the oil strainer to
(b) Remove the oil strainer and gasket.
– On–Vehicle Repair
the oil strainer case.
AT–145