Idler Arm Bracket Assembly - Toyota Hilux Surf 1993 Owner's Manual

SR–96
STEERING – Steering Linkage (2WD)
2. REMOVE IDLER ARM WITH SHAFT
Remove the nut and pull the idler arm with the shaft off
the idler arm bracket.
3. REMOVE OIL SEAL
Using a screwdriver, remove the oil seal.
ASSEMBLY OF IDLER ARM BRACKET
1. INSTALL NEW OIL SEAL
2. APPLY NIP GREASE
3. INSTALL IDLER ARM BRACKET
(a) Insert the idler arm shaft to the bracket.
(b) Install the washer and nut.
Torque: 78 N–m (800 kgf–cm, 58 ft–lbf)
4. INSTALL IDLER ARM BRACKET CAP
(a) Apply sealant to the cap end.
Sealant: Part No. 08826–00090, THREE BOND 1281 or
equivalent
(b) Using SST, install the idler arm bracket cap.
SST 09636–20010