Toyota Hilux Surf 1993 Owner's Manual page 826

SR–94
STEERING – Steering Linkage (2WD)
(MAIN POINTS OF REMOVAL AND
INSTALLATION)
1. DISCONNECT AND CONNECT PITMAN ARM FROM/TO
SECTOR SHAFT
(a) Loosen the pitman arm nut.
(b) Using SST, disconnect the pitman arm from the sec–
tor shaft.
SST 09610–55012
(c) When connecting, align alignment marks on the pit–
man arm and the sector shaft, and install the spring
washer and nut.
2. DISCONNECT PITMAN ARM FROM RELAY ROD
Using SST, disconnect the pitman arm from the relay
rod.
SST 09611–22012
3. DISCONNECT TIE ROD FROM RELAY ROD
Using SST, disconnect the tie rod from the relay rod.
SST 09628–62011
4. DISCONNECT TIE ROD FROM KNUCKLE ARM
(a) Remove the front axle hub. (See page
(b) Using SST, disconnect the tie rod from the knuckle arm.
SST 09628–62011
SA–11