AT–146
AUTOMATIC TRANSMISSION
7. WHEN REPLACING SOLENOIDS
(a) Disconnect the connectors from the solenoids.
(b) Remove the solenoid mounting bolts.
(c) Remove the solenoids.
8. REMOVE OIL TUBES
Pry up both tube ends with a large screwdriver and re–
move the three tubes.
9. DISCONNECT SOLENOID CONNECTORS
Disconnect the three connectors from No.1, No. 2 and
lock–up solenoids.
10. REMOVE VALVE BODY
(a) Disconnect the throttle cable from the cam.
–
On–Vehicle Repair
(c) Remove the five bolts and oil strainer case.
(d) Remove the two gaskets from the case.