Toyota Hilux Surf 1993 Owner's Manual page 625

SUSPENSION AND AXLE –
(b) Using SST, press in a new bearing.
SST 09515–30010 and 09608–35014 (09608–06180)
6. INSTALL NEW OUTER OIL SEAL
Using SST, tap in a new oil seal.
SST 09608–30012 (09608–04020, 09608–04070)
7. INSPECT BEARING CASE
Check for wear or damage.
8. IF NECESSARY, REPLACE BEARING CASE
(a) Remove the oil seal and bearing.
(b) Install nuts to the serration bolts.
(c) Using a hammer, tap out the serration bolts and re–
move the bearing case.
(d) Position the backing plate on the new bearing case
and, using two socket wrenches, press in the serra–
tion bolts.
(e) Install a new bearing and oil seal.
9. INSPECT OIL SEAL FOR WEAR OR DAMAGE
10. IF NECESSARY, REPLACE OIL SEAL
(a) Using SST, remove the oil seal.
SST 09308–00010
(b) Apply MP grease to the oil seal.
(c) Using SST, drive in a new oil seal.
SST 09608–30012 (09608–04020, 09608–04100)
Rear Axle Shaft (Single Tire)
SA–125