Toyota Hilux Surf 1993 Owner's Manual page 441

TRANSFER – Assembly of Transfer
13. INSTALL NEEDLE ROLLER BEARINGS, TRANSFER
LOWER GEAR AND CLUTCH HUB
14. INSTALL NO. 1 SHIFT FORK AND HUB SLEEVE
(a) Install the No.1 shift fork together with the hub
sleeve to the front drive shift fork shaft.
(b) Align the slotted pin hole in the fork with the hole in
the shaft.
(c) Using a pin punch and hammer, install the slotted
spring pin.
15. INSTALL OIL PIPES
Install the two oil pipes with the cutout side positioned
upward.
16. INSTALL IDLER GEAR TO REAR CASE
(a) Using a plastic hammer, install the idler gear to the
rear case.
HINT: Place the rear case on something soft such as
wooden blocks.
(b) Using snap ring pliers, install the snap ring.
TF–29