Toyota Hilux Surf 1993 Owner's Manual page 563

SUSPENSION AND AXLE –
(b) With the oil seal lip facing upward, use press and
plate to press in a new side oil seal until its end is
flush with the surface of the tube.
(c) Using SST, press in the oil seal.
SST 09554–14010
Press in depth: 2.5 mm (0.098 in.)
d) Coat the lip of oil seal with IMP grease.
(
6. INSTALL SIDE GEAR SHAFT
(a) Install the side gear shaft to the tube.
(b) Tighten the three bearing retainer bolts.
7. INSTALL CLUTCH HUB
(a) Install the clutch hub to the shaft.
(b) Using a snap ring expander, install the snap ring.
Front DifferentiaL (Replacement of Side Oil Seal – w/
A D D )
SA–63