Manual Gear Housing (2Wd); Manual Gear Housing Removal And Installation - Toyota Hilux Surf 1993 Owner's Manual

STEERING –

Manual Gear Housing (2WD)

MANUAL GEAR HOUSING (2WD)
REMOVAL AND INSTALLATION OF MANUAL
GEAR HOUSING
Remove and install the parts as shown.
(MAIN POINTS OF REMOVAL AND INSTALLATION)
1. DISCONNECT UNIVERSAL JOINT
(a) Loosen the column side set bolt.
(b) Remove the gear side set bolt.
(c) Place matchmarks on the flexible coupling and
worm shaft.
(d) Slide the shaft rearward to disconnect the shaft
from the worm shaft.
2. DISCONNECT PITMAN ARM FROM GEAR HOUSING
(a) Loosen the pitman arm nut.
(b) Using SST, disconnect pitman arm from the gear
housing.
SST 09610–55012
SR–19