Basic Subassembly Separation - Toyota Hilux Surf 1993 Owner's Manual

MT2–12
MANUAL TRANSMISSION –

BASIC SUBASSEMBLY SEPARATION

1. REMOVE BACK – UP LIGHT SWITCH, VEHICLE
SPEED SENSOR (2WD) AND ENGINE REAR MOU–
NTING
2. REMOVE CLUTCH HOUSING FROM TRANSMIS–
SION CASE
Remove the nine bolts and clutch housing from the
transmission case.
3. (2WD)
REMOVE EXTENSION HOUSING
(a) Remove the six bolts.
(b) Remove the shift lever retainer and oil baffle plate.
(c) Remove the two restrict pins.
(d) Remove the shift lever housing set bolt.
(e) Remove the nine bolts.
(f) Using a plastic hammer, tap the extension housing.
(g) Disengage the shift and select lever from the shift
head.
(h) Pull out the extension housing.
COMPONENT PARTS REMOVAL