Toyota Hilux Surf 1993 Owner's Manual page 594

SA–94
SUSPENSION AND AXLE –
4. REMOVE SLEEVE FORK PIN
(a) Using SST, remove the screw plug.
SST 09313–30021
(b) Using a hammer and punch, drive out the pin
through the hole of clutch case cover.
5. SEPARATE ACTUATOR FROM CLUTCH CASE COVER
AND REMOVE SLEEVE FORK
(a) Remove the two bolts.
(b) Separate the actuator from clutch case cover anc
remove the sleeve fork.
(c) Remove the O–ring from actuator.
6. INSTALL SLEEVE FORK AND ACTUATOR INTO CLUTCH
CASE COVER
(a) Install a new 0–ring to the actuator.
(b) Coat the 0–ring with MP grease.
(c) Place the sleeve fork and install the actuator to the
clutch case cover.
Front Differential (Disassembly and Assembly of
Differential w/ A D D )