SUSPENSION AND AXLE
–
5. CONNECT KNUCKLE ARM TO STEERING KNUCKLE
(a) Clean the threads of the bolts and steering knuckle
with toluene or trichloroethylene.
(b) Apply sealant to the bolt threads.
Sealant: Part No. 08833–00070, THREE BOND 1324
or equivalent.
(e) Connect the knuckle arm to the steering knuckle
with brake hose bracket and torque bolts.
Torque: 183 N–m (1,870 kgf–cm, 135 ft–lbf)
6. INSTALL DUST COVER AND NEW OIL SEAL
Torque: 18 N–m (185 kgf–cm, 13 ft–lbf)
7. INSTALL FRONT AXLE HUB AND DISC BRAKE
CYLINDER
(See page
8. BLEED BRAKE SYSTEM
Front Axle Hub and Steering Knuckle (Steering Knuckle)
SA–37
)
SA–45