Windshield (Adhesive Type) - Toyota Hilux Surf 1993 Owner's Manual

Part name and No.
Adhesive set
08850–00070
(0 – 150C or 32 – 59'F)
08850–00080
(15 – 351C or 59 – 951F)
08850–00090
(35 – 450C or 95 – 1131F)
Dam kit
04562–30040
Ambient
Part No.
temperature
10 20 30 40
Ambient Temperature
800120
BODY
WINDSHIELD
(Adhesive Type)
PREPARE ITEMS LISTED
Main agent 500g (17.64 oz.)
hardening agent 75g (2.65 oz.)
Primer G (for glass) 20g (
0. 71 oz.)
Primer M (for body) 20g (0.71 oz.)
Sponge (for applying primer)
Piano wire 0.6 mm dia. x 1 m (0.024 x 39.37 in.)
Cartridge
Dam
Double–stick tape (for sticking on dam)
Sealant gun (for applying adhesive
Glass or steel sheet (for mixing adhesive)
Putty spatula (for mixing adhesive and correcting adhered parts)
Cleaner (for cleaning adhering surface)
1. CHOOSE SUITABLE ADHESIVE SET
Part name
Use an adhesive set suitable for the ambient tempera–
ture.
2. CHECK ADHESIVE USABLE TIME
After mixing the main and hardening agents, finish glass
installation within the specified time as shown.
Example: For glass installation in ambient temperature
of 25 C (77
E
utes.
3. CHECK ADHESIVE SETTING TIME
First, mix the main and hardening agents. Then, perform
a leak test only after the setting time has elapsed.
Example: The setting time for adhesive set No.35 with
an ambient temperature of 25
NOTICE: Do not drive the vehicle until at least double
the setting time has elapsed.
– Windshield
Contents of set
F), apply adhesive set No.35 within 45 min–
E
C (77
E
BO–17
Quantity
1
1
1
1
2
1
1
F) is 2.5 hours.
E