Toyota Hilux Surf 1993 Owner's Manual page 490

PR–6
PROPELLER SHAFT – PROPELLER SHAFT
2. REMOVE FRONT PROPELLER SHAFT NO.2 DUST
COVER
(W/RF1 A Type Transfer)
Remove the two bolts and two nuts and cover.
(w/VF1 A Type Transfer and A340H)
Remove the four bolts and cover.
3. REMOVE FRONT PROPELLER SHAFT DUST COVER
SUBASSEMBLY
(w/VF1 a Type Transfer and A340H)
Remove the three bolts and cover.
4. REMOVE FRONT PROPELLER SHAFT
(a) Suspend the front side of the propeller shaft.
(b) Put matchmarks on the flanges.
(c) Remove the four nuts or four bolts and nuts.
(d) Remove the front propeller shaft.
5. REMOVE CENTER SUPPORT BEARING FROM
FRAME CROSSMEMBER
(3–JOINT TYPE)
(a) Remove propeller shaft protector set bolts and pro–
peller shaft protector.
(b) Remove center support bearing mount bolts.
6. DISCONNECT PROPELLER SHAFT FLANGE FROM
COMPANION FLANGE ON TRANSFER
(a) Put matchmarks on the flanges.
(b) Remove the four bolts and nuts or four nuts.