Toyota Hilux Surf 1993 Owner's Manual page 978

BODY – Instrument Panel
12–1.(Models Ex. 4–Speed M/T)
REMOVE CLUSTER FINISH PANEL
(a) Remove three screws and pull out the cluster finish
panel.
(b) Disconnect the connectors.
(c) Remove two screws and the cup holder from the
cluster finish panel.
12–2.(4–Speed M/T Models)
REMOVE CLUSTER FINISH PANEL WITH METER HOOD
(a) Remove two screws and pull out the cluster finish
panel with meter hood.
(b) Disconnect the connectors.
(c) Pull off the meter hood.
(d) Remove two screws and the cup holder from the
cluster finish panel.
13. REMOVE INSTRUMENT PANEL NO. 1 REGISTER
Remove two screws and the register.
14. REMOVE COMBINATION METER
(a) Remove four screws.
(b) Disconnect the connectors.
(c) Remove the combination meter.
15. REMOVE LOWER FINISH NO.2 PANEL WITH GLOVE
COMPARTMENT DOOR
(a) Remove four screws, one bolt and the lower finish
No.2 panel with glove compartment door.
(b) Disconnect the connector.
16. REMOVE LOWER CENTER FINISH PANEL
(a) Remove a screw and pull out the panel.
(b) Disconnect the connectors.
BO–35