AUTOMATIC TRANSMISSION
4. INSPECT SHIFT LOCK CONTROL SWITCH
Inspect that there is continuity between each terminals.
: Continuity
Shift
Position
P position
(Release button is not pushed)
R, N, D, 2, L positions
(Mechanically Controlled Shift Lock
System)
COMPONENTS
HINT: Do the following steps, after replacing the shift–
lever, ignition switch, shift lock cable and brake pedal.
(a) Check that the stop lights turn on whlile depressing
(b) Check that the stop lights turn off when releasing
–
Shift Lock System
Terminal
the brake pedal.
the brake pedal.
If stop light operation is not as specified, adjust the stop
light switch position.
AT–215