Toyota Hilux Surf 1993 Owner's Manual page 798

SR–66
STEERING – Power Steering (Gear Housing)
(MAIN POINTS OF REMOVAL AND
INSTALLATION)
1. DISCONNECT UNIVERSAL JOINT
(a) Loosen the column side set bolt.
(b) Remove the gear side set bolt.
(c) Place matchmarks on the flexible coupling and
worm shaft.
(d) Slide the shaft rearward to disconnect the shaft
from the worm shaft.
2. DISCONNECT PRESSURE AND RETURN TUBES FROM
GEAR HOUSING
Using SST, disconnect the pressure and return tubes
from the gear housing.
SST 09631–22020
3. DISCONNECT AND CONNECT PITMAN ARM
(a) Using SST, disconnect the pitman arm from the gear
housing.
SST 09610–55012
(b) When connecting, align alignment marks on the pit–
man arm and the cross shaft, and install the spring
washer and nut.
Torque: 177 N–m (1,800 kgf–cm, 130 ft–lbf)