AUTOMATIC TRANSMISSION
(b) Remove the sixteen
(c) Remove the two Co accumulator piston springs.
(d) Remove the valve body.
HINT: Be careful not to drop the check ball body and
spring.
INSTALLATION OF VALVE BODY AND/OR
SOLENOID VALVE
1. INSTALL VALVE BODY
(a) Install the valve body together the check ball body
HINT: Align the groove of the manual valve to the pin of
the lever.
(b) Align the groove of the manual valve to the pin of
–
On–Vehicle Repair
bolts.
and spring.
the lever.
(c) Install the two Co accumulator piston springs.
AT–147