Key–Off Power Window Signal - Toyota Hilux Surf 1993 Owner's Manual

BE–52
BODY ELECTRICAL SYSTEM
(Key–Off Power Window Signal)
HINT: When the relay circuit is as specified, inspect the
key–off power window signal.
(a) Connect the connector to the relay.
(b) Connect the positive (+) lead from the voltmeter to
(c) Close the door with ignition switch turned to LOCK
(d) Open the door, check that the meter needle indi–
(e) Turn the ignition switch ON, check that the meter
– Power Door Lock Control System
terminal 5 and negative (–) lead to terminal 10.
or ACC, check that the meter needle indicates bat–
tery positive voltage.
cates 0 V.
needle indicates battery positive voltage again.
If operation is not as specified, replace the relay.